Portable Hand Held Thickness Gauges

... Low cost
... Wide measuring range
... Digital or Mechanical Dial

• Other Contact Points and Anvils are available.

• Requests for Certificates of Calibration must be placed at time of purchase. Each certificate includes at least 10 readings across travel of indicator and 15 repeatability readings (5 readings at 3 different travels). Certificates are NIST traceable. $35 ea.

FEATURES:

Incremental measuring mode

The displayed reading is the distance from a "zero" reference. "Zero" may be set at any point of spindle travel by pressing/releasing "ON/CLR" (with "HOLD" off).

Inch/Metric display conversion

Travel reverse
Reverses the direction of the reading (+/-) in relationship to spindle movement.
Auto off
Turns gauge off after 10 minutes of inactivity. When Auto Off is enabled, an hour glass figure appears at the left side of the display.
Floating Zero
Allows the setting of ZERO at any position of the spindle.
Rotating bezel
Allows the user to position the gage display at any angle, throughout 270 degrees, for convenient viewing.
Large direct drive LCD display
Character height .305".

Data output format
RS 232: For direct interfacing to computers and serial printers
Maximum reading hold
Displays and holds the highest reading. Actual spindle position is retained.
3 power sources
    Replaceable 3V Lithium CR2450 Batteries
    A/C Adapter (110V or 220V 50/60 Hz. External) - Optional
    Through the Data Port (Regulated 5VDC)
AGD group 2 for up to .600" travel (Dial Size 2 ¼")
AGD group 3 for up to 1.0" travel (Dial Size 2 ¾")
Force: 0.6" range: 0.5N extended / 2N retracted
Force: 1.0" range: 1N extended / 2N retracted

CALL for Pricing